Tallenna TS Stream USB ISDB-T TV Stick -muistitikulla

1. Yleiskatsaus

A USB ISDB-T TV tuner can receive digital TV signals through an antenna.
By using specific PC software, voit capture and record the raw TS (Transport Stream) from the broadcast.

Essentially:

TV Stick → Demodulation Software → Save as .TS file

2. What You Need

Laitteisto

  • A USB ISDB-T TV stick (esimerkiksi. RTL2832P RTL2832U, IT9135, AF9035, ohjelmistopäivityksen ylläpitoon)
  • Antenni
  • Windows or Linux computer

Ohjelmisto

Different chips use different drivers and applications.
Below are common examples:

PiirisarjaRecommended SoftwareTS Recording
RTL2832UDVBViewer, ProgDVB, SDRSharp + RTL2832U driver ✓
IT9135 / AF9035TotalMedia, BlazeDTV, DVB Dream ✓
Linux (any DVB driver)w_scan + dvbv5-zap + dvbstream ✓ (CLI)

3. Installation Steps (Esimerkki: DVB-T2U_USB_DVB-T2_PC_DTV_vastaanotin_DVB-T2_DVB-T_DVB-C_SDR_FM_DAB_TV_STICK-5.jpg)

vaihe 1 – Install Driver

  1. Plug in your USB TV stick.
  2. If Windows does not install it automatically, use the vendor’s driver (Realtek, ITE, ohjelmistopäivityksen ylläpitoon) tai Zadig tool.
  3. Once installed, check Device Manager — it should appear as something like: ISDB-T BDA Digital Tuner or RTL2832U DVB-T Dongle

vaihe 2 – Install Viewing Software

Let’s use DVBViewer as an example (you can also use ProgDVB or BlazeDTV):

  1. Install DVBViewer.
  2. Open Options → Hardware, and confirm your tuner is detected.
  3. Perform a channel scan (choose ISDB-T mode and your region/frequency band).
  4. Once channels are found, you can watch the broadcast.

vaihe 3 – Record the TS Stream

  1. Open the desired channel.
  2. Click Ennätys.
  3. The software will save the original Transport Stream (.ts) file to your recording folder.
  4. The file name usually includes the timestamp, ESIM.: 2025-11-05_13-30-00_Channel1.ts

Tip: The .ts file contains all streams — video, audio-, subtitles, and metadata.
You can view it with VLC or analyze it with TSReader.

4. Linux Command Line Example

If you are on Linux with DVB drivers installed:

# Scan channels
w_scan -ft -c JP > channels.conf

# Tune to a channel and record
dvbv5-zap -c channels.conf "NHK-G" -r &
dvbstream -o -ps 8192 > output.ts

This will create a raw output.ts file containing the broadcast stream.

5. Using the Recorded TS File

You can:

  • Analyze it with tools like TSReader Lite tai FFprobe
  • Play or transcode it using VLC tai FFmpeg
  • Extract specific programs kanssa: ffmpeg -i input.ts -map 0:p:101 -c copy output_video.ts

Yhteenveto

vaiheAction
1Install the TV stick driver
2Launch DVBViewer / ProgDVB / TotalMedia
3Scan and open the desired channel
4Click “Record” to save the TS file
5Play or analyze with VLC / FFmpeg / TSReader

Esitä kysymys

← Takaisin

Viestisi on lähetetty