הקלט TS Stream באמצעות USB ISDB-T TV Stick

1. סקירה כללית

A USB ISDB-T TV tuner can receive digital TV signals through an antenna.
By using specific PC software, אתה יכול capture and record the raw TS (Transport Stream) from the broadcast.

Essentially:

TV Stick → Demodulation Software → Save as .TS file

---

2. What You Need

חוּמרָה

• א USB ISDB-T TV stick (לְמָשָׁל. RTL2832P RTL2832U, IT9135, AF9035, וכו')
• אַנטֶנָה
• Windows or Linux computer

תוֹכנָה

Different chips use different drivers and applications.
Below are common examples:

Chipset	Recommended Software	TS Recording
RTL2832U	DVBViewer, ProgDVB, SDRSharp + RTL2832U driver	✓
IT9135 / AF9035	TotalMedia, BlazeDTV, DVB Dream	✓
אשר במחשב הנייד או הטאבלט (any DVB driver)	w_scan + dvbv5-zap + dvbstream	✓ (CLI)

---

3. Installation Steps (דוּגמָה: חלונות)

שָׁלָב 1 – Install Driver

1. Plug in your USB TV stick.
2. If Windows does not install it automatically, use the vendor’s driver (Realtek, ITE, וכו') אוֹ Zadig tool.
3. Once installed, check Device Manager — it should appear as something like: ISDB-T BDA Digital Tuner or RTL2832U DVB-T Dongle

---

שָׁלָב 2 – Install Viewing Software

Let’s use DVBViewer as an example (you can also use ProgDVB or BlazeDTV):

1. Install DVBViewer.
2. Open Options → Hardware, and confirm your tuner is detected.
3. Perform a channel scan (choose ISDB-T mode and your region/frequency band).
4. Once channels are found, you can watch the broadcast.

---

שָׁלָב 3 – Record the TS Stream

1. Open the desired channel.
2. Click תקליט.
3. The software will save the original Transport Stream (.ts) file to your recording folder.
4. The file name usually includes the timestamp, לְמָשָׁל.: 2025-11-05_13-30-00_Channel1.ts

Tip: The .ts file contains all streams — video, שֶׁמַע, כתוביות, and metadata.
You can view it with VLC or analyze it with TSReader.

---

4. Linux Command Line Example

If you are on Linux with DVB drivers installed:

# Scan channels
w_scan -ft -c JP > channels.conf

# Tune to a channel and record
dvbv5-zap -c channels.conf "NHK-G" -r &
dvbstream -o -ps 8192 > output.ts

This will create a raw output.ts file containing the broadcast stream.

---

5. Using the Recorded TS File

You can:

• Analyze it with tools like TSReader Lite אוֹ FFprobe
• Play or transcode it using VLC אוֹ FFmpeg
• Extract specific programs עִם: ffmpeg -i input.ts -map 0:p:101 -c copy output_video.ts

---

תַקצִיר

שָׁלָב	Action
1	Install the TV stick driver
2	Launch DVBViewer / ProgDVB / TotalMedia
3	Scan and open the desired channel
4	Click “Record” to save the TS file
5	Play or analyze with VLC / FFmpeg / TSReader