cofdm wireless video transmitter

Cofdm wireless video transmitter HDMI COFDM Wireless Image Video Transmission transmitter Transceiver

 

Cov Ntsiab Lus Muag

Air To Ground>15 km (LUB, UAV, Drone)
Ground Distance>1 km (LUB)
Ground Distance>600 DVB-T DVB-T2 ISDB-T ATSC Tsheb Digital TV kav hlau txais xov aerial built-in teeb liab enlarger koob VCAN0961 (NLOS)
300Mhz~1000Mhz
HDMI 1080P input
Ncua < 300ms
1~5W RF output

DVB-T DVB-T2 ISDB-T ATSC Tsheb Digital TV kav hlau txais xov aerial built-in teeb liab enlarger koob VCAN0961

Machine small size, light weight, tailored for the UAV
Excellent anti-jamming capability and non-line-of-sight diffraction ability
Clear picture quality, high-definition 1080P effect
Real-time image is clear and smooth
Receiver board size is small, easy integration

Specification

 

Ua haujlwm zaus	300MHz～1000MHz (Frequency customization)
Radio frequency power	≤28dBm
Bandwidth	2/4/6/7/8MHz
FEC	1/2，2/3，3/4，5/6，7/8
Protection Interval	1/32，1/16，1/8，1/4
Code stream	2Mbps～16Mbps
Time delay	≤300ms
Bit error rate	≤10-6
Transmission Distance	Ground distance> 1 km; Air to ground> 15 km; Non-line of sight> 600 meters
Audio Video Interfaces	HDMI
Encryption	AES128
Duab pom tseeb	1920*1080P
Image frame rate	60，50,48,30,25,24fps kev
power supply	DC10-15V
Qhov ntev	L118*W66*H22mm
Nyhav	180g

Packing List

Tiny transmitter 1pc
Receiver 1pc
Transmitter Power cable 1pc
Transmitter Antenna 1pc
Receiver Antenna 2pcs
RF extended cable 2pcs

 

 

Chaw ua si

 

 

Cov FAQ

Control Board

Lo lus nug: Is there a button combination that will allow user to change DVB-T parameters like setting Guard Interval, FEC, Txwv Tsis Pub Khoo, etc.? how can we set unit to have better image quality like 16QAM and more robust performance like Guard Interval 1/16 and FEC 1/2?

Teb: Can you see below menu on control board?

Lo lus nug: How to enter above the advance setting?

Teb: When COFDM-903T in the boot, hold (press) the SELECT button (bottom right corner) until to be displayed on the screen, then release the button. After the start, in the configure -> advance within the parameters can be changed.