Įrašykite TS srautą naudodami USB ISDB-T TV Stick

Turinys

1. Apžvalga

A USB ISDB-T TV tuner can receive digital TV signals through an antenna.
By using specific PC software, tu gali capture and record the raw TS (Transport Stream) from the broadcast.

Essentially:

TV Stick → Demodulation Software → Save as .TS file

2. What You Need

Aparatūra

A USB ISDB-T TV stick (pvz. RTL2832P RTL2832U, IT9135, AF9035, ir tt)
Antena
Windows or Linux computer

Programinė įranga

Different chips use different drivers and applications.
Below are common examples:

Lustų rinkinys	Recommended Software	TS Recording
RTL2832U	DVBViewer, ProgDVB, SDRSharp + RTL2832U driver	✓
IT9135 / AF9035	TotalMedia, BlazeDTV, DVB Dream	✓
Linux (any DVB driver)	w_scan + dvbv5-zap + dvbstream	✓ (CLI)

3. Installation Steps (Pavyzdys: Windows)

Žingsnis 1 – Install Driver

Plug in your USB TV stick.
If Windows does not install it automatically, use the vendor’s driver (Realtek, ITE, ir tt) arba Zadig tool.
Once installed, check Device Manager — it should appear as something like: ISDB-T BDA Digital Tuner or RTL2832U DVB-T Dongle

Žingsnis 2 – Install Viewing Software

Let’s use DVBViewer as an example (you can also use ProgDVB or BlazeDTV):

Install DVBViewer.
Open Options → Hardware, and confirm your tuner is detected.
Perform a channel scan (choose ISDB-T mode and your region/frequency band).
Once channels are found, you can watch the broadcast.

Žingsnis 3 – Record the TS Stream

Open the desired channel.
Click Įrašyti.
The software will save the original Transport Stream (.ts) file to your recording folder.
The file name usually includes the timestamp, Pvz.: 2025-11-05_13-30-00_Channel1.ts

Tip: The .ts file contains all streams — video, garso, subtitles, and metadata.
You can view it with VLC or analyze it with TSReader.

4. Linux Command Line Example

If you are on Linux with DVB drivers installed:

# Scan channels
w_scan -ft -c JP > channels.conf

# Tune to a channel and record
dvbv5-zap -c channels.conf "NHK-G" -r &
dvbstream -o -ps 8192 > output.ts

This will create a raw output.ts file containing the broadcast stream.

5. Using the Recorded TS File

You can:

Analyze it with tools like TSReader Lite arba FFprobe
Play or transcode it using VLC arba FFmpeg
Extract specific programs su: ffmpeg -i input.ts -map 0:p:101 -c copy output_video.ts

Santrauka

Žingsnis	Action
1	Install the TV stick driver
2	Launch DVBViewer / ProgDVB / TotalMedia
3	Scan and open the desired channel
4	Click “Record” to save the TS file
5	Play or analyze with VLC / FFmpeg / TSReader