VCAN1301

Driving recorder with GPS with External Camera

era High Definition Car DVR
User Guide
Instruction of Buttons
Functions of Buttons
1. Power Button/Fill Light
Function 1): Power On/Off
To power on the device, press the Power Button for 3 seconds. Video recording is automatically activated after the device is switched on. Press the Power Button again for 3 seconds to switch off the device.
Function 2): Fill Light
Press the Power Button to activate the fill light on/off/auto mode. Under auto mode, the fill light would be activated/deactivated automatically according to the driving environment.

1. REC/ Confirmation
   Function 1): Activate Video Recording
   To start video recording, shortly press the REC button under standby mode. Press it again to stop the video recording.
   Function 2): पुष्टि गर्नुहोस्
   Under Menu/Photographic/Playback mode, REC is also functioned as confirm/ok button.
2. Menu Button/Display Control Button
   Function 1): Enter Menu
   To enter the menu and settings, shortly press the menu button under standby mode. Press the page up/down buttons for selecting; Press the camera button to confirm. Shortly press the menu button to exit.
   (Video Mode, Photographic Mode, and Playback mode with the same operation)
   Function 2): Display On/Off
   The display can be switched off and on by pressing the Menu button for 3 seconds. (Switch on or off the display does not affect video recording)
3. Video Locking/Movement Detection/Display of Camera View/Page Up
   Function 1): Video Locking
   For a record of an evidence video, press the video locking button during recording status for 3 seconds. Video footage will be saved for pre-10 seconds to the next 20 seconds. This footage cannot be overwritten by loop recording.
   Function 2): Movement Detection
   To activate movement detection, press the emergence button under standby for 3 seconds. Shortly press the Video Locking button to deactivate movement detection.
   Function 3): Displaying of Camera
   While connecting the external camera successfully, a sign of notification would be showing on display. To switch the display of the front camera, external camera, and picture-in-picture, display side by side by shortly pressing the video locking button under standby mode.
   Function 4): Page Up
   The video Locking button functioned as a page-up button under the menu and the playback interface.
4. MIC/Page Down/Full Screen
   Function 1): Audio Recording On/Off

During Video Recording, for not record audio into videos by pressing the MIC button. The microphone sign at the right corner shows banned, meaning MIC has been muted. To record audio in the video by pressing the MIC button again, the microphone sign unbanned.
Function 2): Page Down
MIC Button functioned as a page-down button under the menu and the playback interface.
Function 3): Full Screen
Press the MIC button under standby for 3 seconds to enter full-screen mode, and press 3 seconds to exit.

1. Photographic/Playback/Play, Pause
   Function 1): Photographic
   To enter photographic mode, shortly press the photographic button under standby. Press the same button to take photos. To exit photographic mode, by shortly press the REC button.
   Function 2): Playback
   To enter playback mode, press the photographic button for 3 seconds. Press the Video Locking (page up)/MIC Button (page down) to select images and videos, and press the photographic button again to view the selected media file. Press REC 3 seconds to exit playback.
   Function 3): Play/Pause
   Under playback mode, press the camera button to play/pause a video.
2. Reset Button
   In the times that you experiencing trouble with your device, please restart the device by pressing the reset button.
   Instruction
3. Installing Instructions
4. Shut down the car engine.
5. Insert the TF card into the slot of the device.
   [Caution] Suggest using MicroSD card class 8 or above for the car DVR and memory no less than 512MB. The device supports a maximum 64GB TF card.
6. Stick the DVR mounting stand on the front window.
   [Caution] Please cleanse the window before sticking the mounting stand. Dirt and traces of water have resulted in less time of usage. To adjust the mounting frame position, please use the attached cotton thread, and place it at the edge between the sticker and the window, pulling from left to right and right to left until the sticker is removed.
7. Plug in car charger into the car cigarette lighter.
8. Connect the car charger to the Car DVR USB input with the charging Cable.
   [Caution] A USB cable can be laid around the front window.
9. Place the external camera at the back of the car, mind the direction of the view of the camera. The cable can be laid across the seats to the Car DVR at the front, connect the external camera by plugging the camera AV cable into the Car DVR AV-IN port.
10. Adjust the camera position, and ensure the line of sight is perpendicular to the ground.
11. Starting the engine, check if the DVR has been installed correctly.
    [Caution] Indicating lights turned on while the device is functioning and installed correctly; Video recording indication light flashes while the device is recording. Please check with the display, and contact us if it is showing upside down.