360-view camera switcher: Four cameras input, 1 video output for front, back, left, and right via trigger line auto switch.
Text in the Video
Here I show a four-way video automatic switcher. It needs a 12-volt power supply, Now I will connect the power cable to supply this 360-camera viewer.
These three are the switch trigger lines for the left and right sides and rear view video. There are four video input lines here, which can be connected to the front, tył, left, and right cameras respectively.
Here is one video output cable to connect the monitor, Any display can be connected here and you can instantly have a 360-degree view of the car.
This is the remote control, let’s look at the remote control first.
F button to switch the monitor to front-view camera, The default display when the device is turned on is also the front camera video.
The R button can switch to the video of the right camera. Now I am showing you how to switch the view manually.
L button for the left view camera’s video, and B button for the back view camera’s video. You can also manually turn off the camera video by pressing the middle button.
Actually, when you install it on your car, connect the trigger wire to the power wire of the light on your car and it can switch automatically. Here I connect the trigger wires to the 12V power supply.
Now it switches the back view video. When you stop backing up, the backup lights turn off and the display automatically returns to the front-view camera.
Let’s demonstrate the left-view camera again. Turn the steering wheel to the left, the light on the left flashes, the trigger line connected to the left turn signal starts working, and the video automatically switches to the left camera.
The trigger line on the right uses the same principle and can automatically switch the video of the right camera.
It is suitable for cars, samochody ciężarowe, and buses, and is cheap and worth recommending. Please tell us if you want to see other functions or products.
Zadać pytanie
Twoja wiadomość została wysłana