Mini Ethernet Switch Module 3x IP RJ45
Size
Circuit board size: 32×36
Screw hole diameter: 3.5mm
Parameter
Power input interface: 3.3 V 120mA
Number of network ports: 5
Number of network port indicator lights: 5
Network speed: 100Mbps
Interface
Mini switch module and network port connection diagram (functional verification)
Debugging Instructions
- Select the power supply interface, connect the positive and negative poles, power on, and the switch module indicator light will light up. If it does not light up, please unplug the power supply to check, it is possible that the 3.3V power supply is connected in reverse.
- At the same time as powering on, all network ports will light up yellow for one second and then go out.
- All green lights are always on, indicating that the switch is in normal status.
- The yellow light of the network port with a good network cable connection is on, and the yellow light of the network port with data transmission and reception flashes.
isdb-t.com_buyer –
This tiny Ethernet switch module is an absolute lifesaver for clean and efficient installations! Its compact, board-level design integrates perfectly into our drone control boxes and camera housings, saving crucial space where a standard switch would never fit. Setup is truly plug-and-play – it requires zero configuration and draws minimal power, making it ideal for mobile and battery-powered applications. We’ve used it to effortlessly aggregate multiple IP cameras (like 2x 4K streams) onto a single NVR feed. It has proven utterly reliable in the field, surviving vibrations and temperature swings. An incredibly simple yet brilliant solution for adding network ports on the go!