cofdm රැහැන් රහිත වීඩියෝ සම්ප්රේෂකය
Cofdm wireless video transmitter HDMI COFDM Wireless Image Video Transmission transmitter Transceiver
ස්ථාන විකිණීම
Air To Ground>15 කි.මී. (LOS, UAV, Drone)
Ground Distance>1 කි.මී. (LOS)
Ground Distance>600 DVB-T DVB-T2 ISDB-T ATSC කාර් ඩිජිටල් ටීවී ඇන්ටෙනා ගුවන් බිල්ට්-ඉන් සිග්නල් විශාල කිරීමේ බූස්ටරය VCAN0961 (NLOS)
300Mhz~1000Mhz
HDMI 1080P input
ප්රමාදය < 300ms
1~5W RF output
DVB-T DVB-T2 ISDB-T ATSC කාර් ඩිජිටල් ටීවී ඇන්ටෙනා ගුවන් බිල්ට්-ඉන් සිග්නල් විශාල කිරීමේ බූස්ටරය VCAN0961
Machine small size, light weight, tailored for the UAV
Excellent anti-jamming capability and non-line-of-sight diffraction ability
Clear picture quality, high-definition 1080P effect
Real-time image is clear and smooth
Receiver board size is small, easy integration
පිරිවිතර
Working frequency | 300MHz~1000MHz (Frequency customization) |
Radio frequency power | ≤28dBm |
කලාප පළල | 2/4/6/7/8MHz |
FEC | 1/2,2/3,3/4,5/6,7/8 |
Protection Interval | 1/32,1/16,1/8,1/4 |
Code stream | 2Mbps~16Mbps |
Time delay | ≤300ms |
Bit error rate | ≤10-6 |
Transmission Distance | Ground distance> 1 කි.මී.; Air to ground> 15 කි.මී.;
Non-line of sight> 600 මීටර් |
Audio Video Interfaces | HDMI |
ගුප්ත කේතනය | AES128 |
Image clarity | 1920*1080P |
Image frame rate | 60,50,48,30,25,24fps |
power supply | DC10-15V |
මාන | L118*W66*H22mm |
බර | 180උ |
Packing List
Tiny transmitter 1pc
Receiver 1pc
Transmitter Power cable 1pc
Transmitter Antenna 1pc
Receiver Antenna 2pcs
RF extended cable 2pcs
ගැලරිය
නිති අසන පැණ
Control Board
ප්රශ්නය: Is there a button combination that will allow user to change DVB-T parameters like setting Guard Interval, FEC, තාරකා මණ්ඩලය, etc.? how can we set unit to have better image quality like 16QAM and more robust performance like Guard Interval 1/16 and FEC 1/2? |
පිළිතුර: Can you see below menu on control board? |
ප්රශ්නය: How to enter above the advance setting? |
පිළිතුර: When COFDM-903T in the boot, hold (press) the SELECT button (bottom right corner) until to be displayed on the screen, then release the button. After the start, in the configure -> advance within the parameters can be changed. |
සමාලෝචන
තවම සමාලෝචන නොමැත.