car infrared ir transmitter receiver dual channel wireless T20 T-20 T40 for IR headphone

car infrared IR transmitter receiver dual channel wireless T20 T-20 T40 for IR headphone

 

Konga (Feature)

Wireless IR transmitters can be widely applied to TV, MP3 player, DVD CD player, satellite / ʻOku ʻi he letio FM, or another audio device with a stereo 3.5mm audio output. This system uses a special 850nm infrared wavelength, It can transmit audio signals wirelessly, and together with our wireless infrared headphones, treat yourself to an amazing listening experience.

 

• Dual IR stereo transmitter
• IR Transmitter with Dual RCA Stereo Inputs
• Dual Source 2 Channel Output Signal
• Stereo IR 2.3/2.8MHz A Channel 1
• Stereo IR 3.3/3.8MHz B Channel 2

Key Instruction

SW: Power ON/OFF

Fakahū 1: RCA red and white audio input cable; CHA audio input; 12V DC input

Fakahū 2: RCA red and white audio input cable; CHB audio input;

Power Input: Red and black power supply, Red: 12V input, ʻUliʻuli, G

Ngaahi Meʻa Pau

Polokalama (System)	Infrared light 850nm
Founga ʻo e ongo	Tepi (Right / Left Audio)
Carrier Frequency	a) A Channel: Left: 2.3Mhz Right: 2.8Mhz b) B Channel: Left: 3.2Mhz Right: 3.8Mhz
Effective range	10M
Maʻuʻanga ivi	DC12V
Work current	110mA(TYP)
Modulation frequency deviation	60KHZ (Input1.7Vp-p)

Working Voltage: 12V

Working Current: Typically value 65mA (Dual channel 130mA)

Working Frequency:

1. Channel A Left: 2.3MHZ, Channel A Right: 2.8MHZ
2. Channel B Left: 3.2MHZ, Channel B Right: 3.8MHZ

Modulation frequency deviation: 60KHZ (Input 1.7Vp-p)

Connection and Use

1. Connect the red line with the positive pole 12V power source, and another black line connects with a negative pole （GND）
2. Connect the audio source with the transmitter’s RCA (red and white) channel A or Channel B audio input
3. Turn on SW to “ON”, and the transmitter will power on, connect the audio source with the transmitter, and you can choose Channel A or Channel B, use dual-channel infrared headphones which you can switch to CHA or CHB, and then you can enjoy high-fidelity sound music.

Troubleshooting

1. The transmitter did not react when turning on the SW button, kindly check if the power cable with a good connection and if the poles of power are connected correctly
2. When turning on headphones, there is no music, Kindly check if the transmitter is turned on and if the audio cable is connected correctly, If music is playing, or SW button is turned to the corresponding position with the headphone channel

 

 

Ngaahi Foʻi Lea Mahuʻingá

IR transmitter
IR transmitter cable
powerful IR transmitter
headphone jack IR transmitter
car audio IR transmitter
IR transmitter for Android
3.5mm IR transmitter
IR transmitter and receiver
the long-distance IR transmitter
IR infrared transmitter
wireless IR stereo transmitter
IR sensor wireless transmitter
wireless transmitter
transmitter-receiver
tokotaha ʻokú ne ʻavé mo e tokotaha ʻokú ne
wireless transmitter-receiver
Working better for below Wireless IR headphone

WL-2008	VCAN0239