Receptor de enlace descendente inalámbrico COFDM

Receptor de enlace descendente inalámbrico COFDM

–160MHz~860MHz HD video COFDM wireless downlink Receiver with HDMI/AV/USB output

The COFDM Diversity Receiver is a compact digital diversity receiver with integrated H.264/H.265 decoding in a compact and lightweight housing, suitable for use in fluid and high-mobility applications. The unit accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. This receiver can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios is supported.

This COFDM receiver also includes DVR record functionality with Micro SD card or USB disk using REC switch controls. And this receiver also enables video streaming over USB for remote Android device decoders like Smart phone or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously.

When paired with our COFDM wireless Downlink camera transmitter, this COFDM receiver offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.

  • COFDM demodulation and H.264/H.265 video decoder;
  • Full HD resolution, 1080P@60fps; Optional 4K@30fps(3840*2160PAGS).
  • Great security by AES decryption;
  • DVR record with Micro SD card or USB disk;
  • Enables video streaming over USB host for remote device;
  • Stable signal transfer in NLOS and high speed moving;
  • Adjustable working frequency, band width.
Receptor de enlace descendente inalámbrico COFDM
Receptor de enlace descendente inalámbrico COFDM
diversity COFDM Wireless Downlink Receiver
diversity COFDM Wireless Downlink Receiver

Especificación

IO

HD video outputHDMI type A connector
Composite video output4PIN PH2.0mm connector
Salida de audioEmbedded HDMI and 4PIN PH2.0mm connector
Entrada RFTwo SMA female 50Ω
Power in2PIN PH2.0mm connector
USB HostType A connector
OSD KeySwitch key for OSD-display
Rec KeySwitch key for Video recording
3.3V TTL data uart3PIN PH1.25mm connector
3.3V TTL control uart4PIN PH1.25mm connector
TF-CardTF-Card slot

Demodulación

Demodulation FormatsCOFDM(DVB-T)
Carriers2K
Banda anchaConfigurable from 1MHz to 8MHz, step by 1KHz
FEC1/2, 2/3, 3/4, 5/6, 7/8
Intervalo de guardia1/32, 1/16, 1/8, 1/4
ConstelaciónQPSK, 16QAM, 64QAM
Bitrates0.5Mbps to 31.67Mbps

RF

Bandas de frecuencia160MHz~860MHz
Tuning Step size1KHz
Sensibilidad-97±1dBm(BW=8MHz, QPSK, CR=2/3, GI=1/16) for one channel and add 3dBm for two channel

Video and Audio

Salida de videoHDMI y CVBS, USB
Formatos de video1080P or 720P720*480 60I(NTSC), 720*576 50yo(CAMARADA)Optional 3840*2160P
Decodificación de vídeoH.264/H.265
Salida de audioEmbedded HDMI and AV audio
Decodificación de audioAAC
DecryptionAES256
AlmacenamientoUSB disk or micro SD card

Monitoring and control

Comprehensive receiver setup with our Config Panel or Windows PC or other device via control UART.

Temperature range

Full specification:  0° to +70°C Ambient

Almacenamiento: –40° to +80°C

Características físicas

Peso: 169sol

Dimensiones: 91x80x30mm

Power requirements

Input range: 7~16VDC

El consumo de energía: about 250mA@12V

Llaves & LEDs:

This COFDM receiver has 3 LEDs:

PWR LED: indicador de potencia, red constant light when device is normal powered;

LED de enlace: wireless link indicator, green blinks when video stream received;

REC LED: indicador de registro, green constant light when video recording

REC key: switch button for video recording, short press to change it’s status. The receiver will automatically check the storage device(micro SD card or USB disk, priority SD card) after power on and start to record video when the storage device is inserted. Just press the button to stop or record again.

OSD key: turn on/off the status of the OSD displaying, long press it to switch(more than 1s). the status will be kept after reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:

RF:338.0MHz BW:4.0megahercio ; RF, frecuencia de trabajo; B/N, banda ancha

CR QPSK:2/3  soldado americano:1/16        ; Constelación, FEC, Intervalo de guardia

AIRE:3.90mbps; AIRE, wireless transmitting bitrates

VBR:3.05Mbps AES OFF ; VBR, video bitrates; AES APAGADO, AES encryption turned off.

SIG1:27   SIG2:22           ; SIG1, signal intensity of ant 1; SIG2, signal intensity of ant 2   

ber1:0.14%  a 2:100.00%     ; ber1, bit error rate of ant 1; a 2, bit error rate of ant 2

REC APAGADO Sin almacenamiento ; video recording status

Hacer una pregunta

← Volver

Gracias por tu respuesta. ✨