COFDM беспроводной приемник нисходящей линии связи
–160MHz~860MHz HD video COFDM wireless downlink Receiver with HDMI/AV/USB output
The COFDM Diversity Receiver is a compact digital diversity receiver with integrated H.264/H.265 decoding in a compact and lightweight housing, suitable for use in fluid and high-mobility applications. The unit accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. This receiver can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios is supported.
This COFDM receiver also includes DVR record functionality with Micro SD card or USB disk using REC switch controls. And this receiver also enables video streaming over USB for remote Android device decoders like Smart phone or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously.
When paired with our COFDM wireless Downlink camera transmitter, this COFDM receiver offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.
- COFDM demodulation and H.264/H.265 video decoder;
- Full HD resolution, 1080P@60 кадров в секунду; Optional 4K@30fps(3840*2160П).
- Great security by AES decryption;
- DVR record with Micro SD card or USB disk;
- Enables video streaming over USB host for remote device;
- Stable signal transfer in NLOS and high speed moving;
- Adjustable working frequency, band width.


Спецификация
IO
| HD video output | HDMI type A connector |
| Composite video output | 4PIN PH2.0mm connector |
| Аудиовыход | Embedded HDMI and 4PIN PH2.0mm connector |
| RF вход | Two SMA female 50Ω |
| Power in | 2PIN PH2.0mm connector |
| USB Host | Type A connector |
| OSD Key | Switch key for OSD-display |
| Rec Key | Switch key for Video recording |
| 3.3V TTL data uart | 3PIN PH1.25mm connector |
| 3.3V TTL control uart | 4PIN PH1.25mm connector |
| TF-Card | TF-Card slot |
Демодуляция
| Demodulation Formats | КОФДМ(ДВБ-Т) |
| Carriers | 2К |
| Пропускная способность | Configurable from 1MHz to 8MHz, step by 1KHz |
| ТЭК | 1/2, 2/3, 3/4, 5/6, 7/8 |
| Защитный интервал | 1/32, 1/16, 1/8, 1/4 |
| Созвездие | КФСК, 16КАМ, 64КАМ |
| Bitrates | 0.5Mbps to 31.67Mbps |
РФ
| Диапазоны частот | 160МГц~860МГц |
| Tuning Step size | 1KHz |
| Чувствительность | -97±1dBm(BW=8MHz, КФСК, CR=2/3, GI=1/16) for one channel and add 3dBm for two channel |
Video and Audio
| Видеовыход | HDMI и CVBS, USB |
| Video formats | 1080P or 720P720*480 60I(NTSC), 720*576 50я(ПАЛ)Optional 3840*2160P |
| Video Decoding | Х.264/Х.265 |
| Аудиовыход | Embedded HDMI and AV audio |
| Audio Decoding | ААС |
| Decryption | AES256 |
| Хранилище | USB disk or micro SD card |
Monitoring and control
Comprehensive receiver setup with our Config Panel or Windows PC or other device via control UART.
Temperature range
Full specification: 0° to +70°C Ambient
Хранилище: –40° to +80°C
Physical Characteristics
Масса: 169г
Размеры: 91x80x30mm
Power requirements
Input range: 7~16VDC
Потребляемая мощность: about 250mA@12V
Keys & LEDs:
This COFDM receiver has 3 LEDs:
PWR LED: power indicator, red constant light when device is normal powered;
Индикатор связи: wireless link indicator, green blinks when video stream received;
REC LED: record indicator, green constant light when video recording
REC key: switch button for video recording, short press to change it’s status. The receiver will automatically check the storage device(micro SD card or USB disk, priority SD card) after power on and start to record video when the storage device is inserted. Just press the button to stop or record again.
OSD key: turn on/off the status of the OSD displaying, long press it to switch(more than 1s). the status will be kept after reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:
РФ:338.0MHz BW:4.0МГц ; РФ, рабочая частота; ЧБ, пропускная способность
КФСК ЧР:2/3 GI:1/16 ; Созвездие, ТЭК, Защитный интервал
ВОЗДУХ:3.90Мбит/с; ВОЗДУХ, wireless transmitting bitrates
ВБР:3.05Mbps AES OFF ; ВБР, video bitrates; AES ВЫКЛ., AES encryption turned off.
СИГ1:27 СИГ2:22 ; СИГ1, signal intensity of ant 1; СИГ2, signal intensity of ant 2
бер1:0.14% ber2:100.00% ; бер1, bit error rate of ant 1; ber2, bit error rate of ant 2
ЗАПИСЬ ВЫКЛ. Нет сохранения ; video recording status

Задать вопрос
Спасибо за ответ. ✨