Ricevitore wireless downlink wireless

Ricevitore wireless downlink wireless

–160MHz~860MHz HD video COFDM wireless downlink Receiver with HDMI/AV/USB output

The COFDM Diversity Receiver is a compact digital diversity receiver with integrated H.264/H.265 decoding in a compact and lightweight housing, suitable for use in fluid and high-mobility applications. The unit accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. This receiver can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios is supported.

This COFDM receiver also includes DVR record functionality with Micro SD card or USB disk using REC switch controls. And this receiver also enables video streaming over USB for remote Android device decoders like Smart phone or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously.

When paired with our COFDM wireless Downlink camera transmitter, this COFDM receiver offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.

  • COFDM demodulation and H.264/H.265 video decoder;
  • Full HD resolution, 1080P@60fps; Optional 4K@30fps(3840*2160P).
  • Great security by AES decryption;
  • DVR record with Micro SD card or USB disk;
  • Enables video streaming over USB host for remote device;
  • Stable signal transfer in NLOS and high speed moving;
  • Adjustable working frequency, band width.
Ricevitore wireless downlink wireless
Ricevitore wireless downlink wireless
diversity COFDM Wireless Downlink Receiver
diversity COFDM Wireless Downlink Receiver

specificazione

IO

HD video outputHDMI type A connector
Composite video output4PIN PH2.0mm connector
Uscita audioEmbedded HDMI and 4PIN PH2.0mm connector
Ingresso RFTwo SMA female 50Ω
Power in2PIN PH2.0mm connector
USB HostType A connector
OSD KeySwitch key for OSD-display
Rec KeySwitch key for Video recording
3.3V TTL data uart3PIN PH1.25mm connector
3.3V TTL control uart4PIN PH1.25mm connector
TF-CardTF-Card slot

Demodulazione

Demodulation FormatsCOFDM(DVB-T)
Carriers2K
Larghezza di bandaConfigurable from 1MHz to 8MHz, step by 1KHz
FEC1/2, 2/3, 3/4, 5/6, 7/8
Intervallo di guardia1/32, 1/16, 1/8, 1/4
CostellazioneQPSK, 16QAM, 64QAM
Bitrates0.5Mbps to 31.67Mbps

RF

Bande di frequenza160MHz~860 MHz
Tuning Step size1KHz
sensibilità-97±1dBm(BW=8MHz, QPSK, CR=2/3, GI=1/16) for one channel and add 3dBm for two channel

Video and Audio

Uscita videoHDMI e CVBS, USB
Video formats1080P or 720P720*480 60I(NTSC), 720*576 50io(AMICO)Optional 3840*2160P
Video DecodingH.264/H.265
Uscita audioEmbedded HDMI and AV audio
Decodifica audioAAC
DecryptionAES256
MagazzinaggioUSB disk or micro SD card

Monitoring and control

Comprehensive receiver setup with our Config Panel or Windows PC or other device via control UART.

Temperature range

Full specification:  0° to +70°C Ambient

Magazzinaggio: –40° to +80°C

Caratteristiche fisiche

Peso: 169g

Dimensioni: 91x80x30mm

Power requirements

Input range: 7~16VDC

Consumo di energia: about 250mA@12V

Keys & LEDs:

This COFDM receiver has 3 LEDs:

PWR LED: Indicatore di potenza, red constant light when device is normal powered;

LED di collegamento: wireless link indicator, green blinks when video stream received;

REC LED: Indicatore di record, green constant light when video recording

REC key: switch button for video recording, short press to change it’s status. The receiver will automatically check the storage device(micro SD card or USB disk, priority SD card) after power on and start to record video when the storage device is inserted. Just press the button to stop or record again.

OSD key: turn on/off the status of the OSD displaying, long press it to switch(more than 1s). the status will be kept after reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:

RF:338.0MHz BW:4.0MHz ; RF, frequenza di lavoro; BW, larghezza di banda

QPSKCR:2/3  GI:1/16        ; Costellazione, FEC, Intervallo di guardia

ARIA:3.90Mbps; ARIA, wireless transmitting bitrates

VBR:3.05Mbps AES OFF ; VBR, video bitrates; AES DISATTIVATO, AES encryption turned off.

SIG1:27   SIG2:22           ; SIG1, signal intensity of ant 1; SIG2, signal intensity of ant 2   

ber1:0.14%  a 2:100.00%     ; ber1, bit error rate of ant 1; a 2, bit error rate of ant 2

REC OFF Nessuna memorizzazione ; video recording status

Fai una domanda

← Precedente

Grazie per la risposta. ✨