TDD pa power amplifier
TDD PA Power Amplifier Module for DVB-T COFDM TX Transmitter transmission 5w
O módulo amplificador de potência pa realiza a saída de amplificação de potência do sinal RF. When the input voltage is 28V, conecte à placa de modulação COFDM, the output power can be up to 5W (+30dBm)
Características
- Banda de frequência de trabalho: 815MHz~830MHz (mais frequência é ajustável)
- RX Gain: 1dB+/-1dB
- TX Gain: 10dB+/-1dB
- TX Power: 5C
Especificação
| Item | Parâmetro | Observação |
| Faixa de frequência (MHz) | 815-830Mzh | accept modify according to buyer’s requirement |
| Potência de saída (C) | 5C | No ALC control |
| In-band group delay (ns) | ≤50 | |
| TX gain (dB) | 16±1.0 | Set gain according to customer requirements |
| In-band fluctuation | ≤1dB | Peak |
| Nível de entrada (dBm) | +22±1.0 | |
| Shoulder ratio (dBc) | ≤-30 | |
| RX gain (dB) | 5 | |
| RX Noise figure (dB) | ≤2.5 | |
| RF switching level | +3.3V～+5V | High level send low-level receive |
| Isolation | 50dB | |
| Power supply requirements | +11V～+18V Vdc | |
| RX operating current | ≤0.6A | |
| TX operating current | ≤3.0A | |
| Temperatura de trabalho | -20～+70℃ | |
| Tipo de interface | SMA-50KFD | |
| Module Dimension (milímetros) | 105 * 60 * 14 |
Shape and installation instructions
1. Dimensões: 105 * 60 *14 (milímetros) (without socket)
2. Interface form:
1 power supply conditions: +12Fonte de alimentação V: plug
2 RF input interface: SMA-50KFD
RF output interface: SMA-50KFD
3. Mounting hole diameter size: 4 Φ3.5 through holes for 4 mounting holes for installation.
20C
Especificação
| Item | Parâmetro | Observação |
| Faixa de frequência (MHz) | 500-530Mzh | accept modify according to buyer’s requirement |
| Potência de saída (C) | 20C | No ALC control |
| In-band group delay (ns) | ≤50 | |
| TX gain (dB) | 48±1.0 | Set gain according to customer requirements |
| In-band fluctuation | ≤1dB | Peak |
| Nível de entrada (dBm) | -80 | |
| Shoulder ratio (dBc) | ≤-30 | |
| RX gain (dB) | 5 | |
| RX Noise figure (dB) | ≤2.5 | |
| RF switching level | +3.3V～+5V | High level send low-level receive |
| Isolation | 50dB | |
| Power supply requirements | ≤＋28 Vdc 20W/3A | |
| RX operating current | ≤0.6A | |
| TX operating current | ≤3.0A | |
| Temperatura de trabalho | -20～+65℃ | |
| Tipo de interface | SMA-50KFD | |
| Module Dimension (milímetros) | 178 × 91 × 25 |
Power supply conditions:
+28Fonte de alimentação V: Alfinete 2
+12Fonte de alimentação V: Alfinete 3
Grounding: Alfinete 1
isdb-t.com_buyer –
This TDD PA Power Amplifier Module has been an absolute game-changer for my DVB-T/COFDM transmitter setup. The build quality is exceptional, and the installation process was surprisingly straightforward. Optei pela versão 10W, and the boost in transmission power and signal clarity is nothing short of impressive. It delivers a incredibly stable and clean output, drastically improving my range and signal penetration without any noticeable distortion. The module operates efficiently and remains remarkably cool even after extended use, which speaks volumes about its design. It has brought a level of professional-grade reliability and performance to my transmission system that I was previously missing. For anyone looking to significantly enhance their broadcast capabilities, this amplifier is an outstanding investment and comes highly recommended!