Посібник із встановлення інтерфейсу Porsche PCM3.1 Wireless CarPlay Android Auto
Upgrade your Porsche PCM3.1 infotainment system with a wireless CarPlay and Android Auto interface decoder box. This installation manual provides detailed instructions for connecting the interface module, configuring DIP switches, setting up audio output, integrating cameras, and controlling CarPlay functions through the original Porsche head unit.
This guide is designed for installers, distributors, and Porsche owners who need technical information for PCM3.1 CarPlay interface installation.
Огляд продукту
The Porsche PCM3.1 CarPlay interface decoder box allows modern smartphone connectivity while keeping the original Porsche infotainment system.
After installation, users can enjoy:
- Wireless Apple CarPlay
- Android Auto
- Original OEM screen display
- Original head unit button control
- OEM or aftermarket reverse camera support
- Front camera integration
- Multiple audio output options
DIP Switch Configuration
Before installation, configure the DIP switches according to the vehicle model and system requirements.
The manual explains:
- Location of the DIP switches
- Correct switch positions
- Restart procedure after changing switch settings
After changing the DIP switch configuration, the vehicle should be powered off and restarted to apply the new settings.
Cable Connection and Installation
The PCM3.1 CarPlay interface requires connection between the original Porsche head unit and the decoder box.
Main installation steps include:
- Power cable connection
- LVDS display cable connection
- FPC adapter board installation
- WiFi antenna connection
- USB-AV cable connection
- Microphone connection
The FPC adapter board must be installed carefully to avoid incorrect cable direction or connection issues.
Audio Output Setup
The CarPlay interface supports two audio connection methods:
1. AUX Audio Output
The vehicle audio source needs to be switched to AUX mode.
Installation steps:
- Disconnect the phone Bluetooth connection from the original PCM system.
- Select AUX as the audio input source.
- Switch between the original PCM system and CarPlay interface using the INFO button.
2. Original Car Bluetooth Output
The decoder box can also send CarPlay and Android Auto audio through the vehicle Bluetooth system.
This mode supports:
- Apple CarPlay audio
- Android Auto audio
- Bluetooth phone calls
Примітка:
USB/SD media audio and screen mirroring audio are not supported in this mode.
Reverse Camera and Front Camera Integration
The PCM3.1 CarPlay interface supports different camera configurations:
Original OEM Camera
The system supports Porsche factory reverse cameras.
Settings depend on:
- Automatic transmission vehicles
- Manual transmission vehicles
Aftermarket Reverse Camera
For vehicles without an original camera, an aftermarket reverse camera can be connected.
The interface supports configuration of:
- Reverse camera mode
- Reverse detection
- Camera switching
Front Camera Support
The front camera display time can be configured from 1 до 15 секунд.
If no front camera is installed, the front camera time should be set to 0 секунд.
Original Porsche Button Control
After installation, many original Porsche controls can continue working with the CarPlay interface.
Supported functions include:
- Answer phone calls
- End calls
- Next/previous track
- Volume adjustment
- Switching between original PCM and CarPlay system
- Siri activation
Installation Location of CarPlay Decoder Box
The decoder box can be installed:
- Near the OEM head unit
- Behind the original display system
- Inside the glove box
Choose a suitable location that protects the module and maintains good WiFi antenna performance.
Download PCM3.1 CarPlay Installation Manual
Download the complete Porsche PCM3.1 Wireless CarPlay Android Auto Interface Installation Manual for detailed wiring diagrams, configuration instructions, and troubleshooting information.
Задайте питання
Дякуємо за вашу відповідь. ✨