Радіочастотний передній модуль із перемикачем PA LNA T-R

Q: Q1: Is this a complete Mesh Radio?

A: No. This product is an RF front-end module designed to work with external Mesh radios, COFDM basebands, or SDR platforms.

Q: Q2: Does it support full-duplex communication?

A: No. The module is designed for half-duplex (TDD) systems using a high-speed T/R switch.

Q: Q4: Is this module suitable for UAV applications?

A: Yes. Its compact size, light weight, and fast TX/RX switching make it ideal for UAV and airborne platforms.

Q: Q5: Can this module improve communication range?

A: Yes. With a 33 dBm output power and low-noise receiver design, it significantly extends link distance and improves signal reliability.

Зміст

L-Band RF Front-End Module with PA, LNA & High-Speed T/R Switch (1100–1500MHz)

Огляд

The L-Band RF Front-End Module is a compact, high-performance RF solution integrating a power amplifier (PA), low-noise amplifier (LNA), and a high-speed transmit/receive (T/R) switch in a single enclosure. Operating across the 1100–1500 MHz frequency band, it is designed to significantly extend communication range, improve link robustness, and enhance signal quality for Mesh radios, COFDM systems, and SDR platforms.

З a 33 dBm RF output power, low EVM performance, and microsecond-level TX/RX switching speed, this module is optimized for time-division duplex (TDD) communication systems. Its lightweight and compact design makes it ideal for UAVs, mobile mesh nodes, and tactical communication applications where size, вага, and reliability are critical.

Радіочастотний передній модуль із перемикачем PA LNA T-R

Особливості

Wide operating frequency range: 1100–1500 MHz (L-діапазон)
Інтегрований PA + LNA + T/R switch in one compact module
33 дБм (2W) RF output power for extended communication range
Низький EVM ≤ 3.5%, suitable for digital modulation (COFDM / QAM / QPSK)
Високошвидкісний TX/RX switching ≤ 5 μs, ideal for TDD systems
Low noise figure (≤ 3 дБ) for improved receiver sensitivity
Compact and lightweight design for UAV and portable systems
Призначений для Mesh, COFDM, and SDR-based communication platforms

Технічні умови

RF Transmitter Specifications

Робоча частота: 1100–1500 MHz
RF Output Power: 33 дБм
Посилення: 40 дБ
Отримати рівність: ±1 dB
Вхідні дані / Output Return Loss: ≥ 8 дБ
Amplifier EVM: ≤ 3.5%
High-Speed ON / OFF Switching: ≤ 5 μs

RF Receiver Specifications

Робоча частота: 1100–1500 MHz
Посилення: 10 дБ
Отримати рівність: ±1 dB
Вхідні дані / Output Return Loss: 8 дБ
Фігура шуму: ≤ 3 дБ
OIP3: ≥ 10 дБм

Потужність

Вхідна потужність: 24 VDC
Споживання енергії (Макс): 20 W

Інтерфейси

RF Ports: MCX
PA Control & Вхідна потужність: PHD 6P, 1.5 мм

Physical Specifications

Розміри (Д × Ш × В): 75 × 50 × 11 мм
Вага: 75 g

Екологічний

Робоча температура: −40°C to +65°C

L-Band RF Front-End Module with PA LNA High-Speed TR Switch 1100–1500MHz

Додатки

UAV Mesh communication systems
COFDM video and data transmission links
Tactical and public safety mesh networks
SDR platforms and software-defined radios
Військовий, правоохоронці, and emergency communications
Мобільний, vehicle-mounted, or fixed L-band RF systems

FAQ

Q1: Is this a complete Mesh Radio?

A: Немає. This product is an RF front-end module designed to work with external Mesh radios, COFDM basebands, or SDR platforms.

Q2: Does it support full-duplex communication?

A: Немає. The module is designed for half-duplex (TDD) systems using a high-speed T/R switch.

Q3: What type of radios can be connected to this module?

A: Any radio or baseband with RF input/output operating within the 1100–1500 MHz frequency range.

Q4: Is this module suitable for UAV applications?

A: Так. Its compact size, легка вага, and fast TX/RX switching make it ideal for UAV and airborne platforms.

Q5: Can this module improve communication range?

A: Так. З a 33 dBm output power and low-noise receiver design, it significantly extends link distance and improves signal reliability.