We require an RF OEM transceiver with these features:
- نطاق الترددات: L Band and C Band (1200-1800 MHz and 4400-5000MHz)
- RF عرض النطاق الترددي: 2M/5M/10M/20M/40MHz
- طاقة الإخراج: 36-40 ديسيبل (4W and 10W 2×2 ميمو)
- حساسية المتلقي: L Band-97dBm Max, C band -90 dBm Max
- Modulation Support: OFDM: DSSS/CCK BPSK/QPSK, COFDM: BPSK/QPSK/16-QAM/64-QAM
- Layer 2 // ETH Port
- التشفير: AES256
- مدخلات الطاقة: 12V-26V DC
- درجة حرارة التشغيل: -40℃ ~ +65℃
We also prefer FHSS. Are there any products with these specifications? In that case, would you be able to provide the datasheet? Even if you don’t currently produce products with these features, let’s discuss the possibility of future development.
The device described by the specifications is ahigh-power, ruggedized, dual-band wireless communication system designed forيؤمن, بعيد المدى, high-throughput data transmission in challenging environments. Here’s a breakdown of its key features and typical applications:
دلائل الميزات & تحليل
- نطاقات التردد:
- ل الفرقة (1200–1800 MHz): Better penetration through obstacles, suitable for non-line-of-sight (NLOS) scenarios (على سبيل المثال, الغابات, urban areas).
- ج الفرقة (4400–5000 MHz): Higher bandwidth for faster data rates but shorter range; ideal for line-of-sight (ال) الروابط.
- RF Bandwidth Flexibility (2–40 MHz): Balances data throughput and range. Wider bandwidths (على سبيل المثال, 40 ميغاهيرتز) enable high-speed applications, while narrower ones extend range or reduce interference.
- High Output Power (4W–10W, 2×2 ميمو): Supports long-distance links (potentially tens of kilometers). MIMO improves spectral efficiency and reliability through spatial diversity.
- حساسية المتلقي: Excellent for detecting weak signals (-97 dBm in L Band, -90 dBm in C Band), critical for maintaining links in low-signal conditions.
- Modulation Schemes:
- Legacy Support: DSSS/CCK (used in older Wi-Fi/802.11b) for backward compatibility.
- Modern Standards: OFDM/COFDM with up to 64-QAM for high-speed data (similar to LTE/Wi-Fi 802.11ac).
- Layer 2 Ethernet Port: Acts as a wireless bridge, connecting wired networks (على سبيل المثال, LANs) over a wireless link.
- AES-256 Encryption: Ensures secure data transmission, aligning with military/enterprise-grade requirements.
- Rugged Design:
- مدخلات الطاقة (12–26V DC): Compatible with vehicles (12V/24V systems) or industrial DC sources.
- درجة حرارة التشغيل (-40°C to +65°C): Survives extreme environments (arctic cold to desert heat).
حالات الاستخدام النموذجية
- Military/Defense Tactical Networks:
- يؤمن, mobile field communications for command centers, الطائرات بدون طيار, or vehicle-to-vehicle links.
- Survivable in electronic warfare (dual-band redundancy mitigates jamming).
- Public Safety & Emergency Response:
- Rapid deployment for disaster recovery (على سبيل المثال, connecting temporary command posts, hospitals).
- Fire/police departments requiring reliable NLOS links in urban/rural areas.
- صناعي & Remote Site Connectivity:
- Oil/gas pipelines, التعدين, or wind farms needing backhaul for SCADA/IoT sensors.
- Replaces fiber/cable in hard-to-reach locations.
- Cellular Backhaul:
- Cost-effective alternative to wired backhaul for 4G/5G small cells in rural areas.
- مراقبة & Border Security:
- Transmitting HD video from remote cameras or UAVs (using high-bandwidth C Band).
- Transportation & Maritime:
- Ship-to-shore or train-to-base communications leveraging L Band’s NLOS capabilities.
Why This Device?
- Dual-Band Versatility: Switch between L Band (range/resilience) and C Band (سرعة) as needed.
- MIMO Performance: Doubles capacity/reliability for critical data (فيديو, VoIP, القياس عن بعد).
- Ruggedness: Deployable in mobile/outdoor settings without climate-controlled enclosures.
This system is ideal for organizations needingيؤمن, high-speed wireless links in austere or dynamic environments where traditional infrastructure is impractical.
اطرح سؤالاً
شكرًا لردكم ✨