Requerimos un transceptor OEM RF con estas características:
- Rango de frecuencia: L Band and C Band (1200-1800 MHz and 4400-5000MHz)
- El ancho de banda de RF: 2M/5M/10M/20M/40MHz
- Potencia de salida: 36-40 dBm (4W and 10W 2×2 MIMO)
- Sensibilidad del receptor: L Band-97dBm Max, C band -90 dBm Max
- Modulation Support: OFDM: DSSS/CCK BPSK/QPSK, COFDM: BPSK/QPSK/16-QAM/64-QAM
- Layer 2 // ETH Port
- Cifrado: AES256
- Entrada de alimentación: 12V-26V DC
- Temperatura de funcionamiento: -40℃ ~ +65℃
También preferimos FHSS. Are there any products with these specifications? En ese caso, would you be able to provide the datasheet? Even if you don’t currently produce products with these features, let’s discuss the possibility of future development.
The device described by the specifications is aalta potencia, ruggedized, dual-band wireless communication system diseñado paraseguro, de largo alcance, high-throughput data transmission in challenging environments. Here’s a breakdown of its key features and typical applications:
Características clave & Análisis
- Bandas de frecuencia:
- L Band (1200–1800 MHz): Better penetration through obstacles, suitable for non-line-of-sight (NLOS) scenarios (P.EJ., bosques, urban areas).
- C Band (4400–5000 MHz): Higher bandwidth for faster data rates but shorter range; ideal for line-of-sight (LOS) campo de golf.
- RF Bandwidth Flexibility (2–40 MHz): Balances data throughput and range. Wider bandwidths (P.EJ., 40 megahercio) enable high-speed applications, while narrower ones extend range or reduce interference.
- High Output Power (4W–10W, 2×2 MIMO): Supports long-distance links (potentially tens of kilometers). MIMO improves spectral efficiency and reliability through spatial diversity.
- Sensibilidad del receptor: Excellent for detecting weak signals (-97 dBm in L Band, -90 dBm in C Band), critical for maintaining links in low-signal conditions.
- Modulation Schemes:
- Legacy Support: DSSS/CCK (used in older Wi-Fi/802.11b) for backward compatibility.
- Modern Standards: OFDM/COFDM with up to 64-QAM for high-speed data (similar to LTE/Wi-Fi 802.11ac).
- Layer 2 Ethernet Port: Acts as a wireless bridge, connecting wired networks (P.EJ., LANs) over a wireless link.
- AES-256 Encryption: Ensures secure data transmission, aligning with military/enterprise-grade requirements.
- Rugged Design:
- Entrada de alimentación (12–26V DC): Compatible with vehicles (12V/24V systems) or industrial DC sources.
- Temperatura de funcionamiento (-40°C to +65°C): Survives extreme environments (arctic cold to desert heat).
Casos de uso típicos
- Military/Defense Tactical Networks:
- Secure, mobile field communications for command centers, drones, or vehicle-to-vehicle links.
- Survivable in electronic warfare (dual-band redundancy mitigates jamming).
- Seguridad Pública & Respuesta de emergencia:
- Rapid deployment for disaster recovery (P.EJ., connecting temporary command posts, hospitals).
- Fire/police departments requiring reliable NLOS links in urban/rural areas.
- Industrial & Remote Site Connectivity:
- Oil/gas pipelines, minería, or wind farms needing backhaul for SCADA/IoT sensors.
- Replaces fiber/cable in hard-to-reach locations.
- Cellular Backhaul:
- Cost-effective alternative to wired backhaul for 4G/5G small cells in rural areas.
- Vigilancia & Border Security:
- Transmitting HD video from remote cameras or UAVs (using high-bandwidth C Band).
- Transportation & Maritime:
- Ship-to-shore or train-to-base communications leveraging L Band’s NLOS capabilities.
Why This Device?
- Dual-Band Versatility: Switch between L Band (range/resilience) and C Band (velocidad) as needed.
- MIMO Performance: Doubles capacity/reliability for critical data (vídeo, VoIP, telemetría).
- Ruggedness: Deployable in mobile/outdoor settings without climate-controlled enclosures.
This system is ideal for organizations needingseguro, high-speed wireless links in austere or dynamic environments where traditional infrastructure is impractical.
Hacer una pregunta
Gracias por tu respuesta. ✨