L C 밴드 RF 이더넷 비디오 데이터 트랜시버

이러한 기능을 갖춘 RF OEM 트랜시버가 필요합니다.:

• 주파수 범위: L Band and C Band (1200-1800 MHz and 4400-5000MHz)
• RF 대역폭: 2M/5M/10M/20M/40MHz
• 출력 전력: 36-40 dBm (4W and 10W 2×2 MIMO)
• 수신기 감도: L Band-97dBm Max, C band -90 dBm Max
• Modulation Support: OFDM: DSSS/CCK BPSK/QPSK, COFDM: BPSK/QPSK/16-QAM/64-QAM
• Layer 2 // ETH Port
• 암호화: AES256
• 전원 입력: 12V-26V DC
• 작동 온도: -40℃ ~ +65℃

우리는 또한 FHSS를 선호합니다. Are there any products with these specifications? In that case, would you be able to provide the datasheet? Even if you don’t currently produce products with these features, let’s discuss the possibility of future development.

The device described by the specifications is a고전력, ruggedized, dual-band wireless communication system 위해 설계된안전한, 장거리, high-throughput data transmission in challenging environments. Here’s a breakdown of its key features and typical applications:

주요 특징 & Analysis

1. 주파수 대역:
   • L밴드 (1200–1800 MHz): Better penetration through obstacles, suitable for non-line-of-sight (NLOS) scenarios (예를 들어, 숲, urban areas).
   • C 밴드 (4400–5000 MHz): Higher bandwidth for faster data rates but shorter range; ideal for line-of-sight (로스) 모래밭.
2. RF Bandwidth Flexibility (2–40 MHz): Balances data throughput and range. Wider bandwidths (예를 들어, 40 MHz) enable high-speed applications, while narrower ones extend range or reduce interference.
3. High Output Power (4W–10W, 2×2 MIMO): Supports long-distance links (potentially tens of kilometers). MIMO improves spectral efficiency and reliability through spatial diversity.
4. 수신기 감도: Excellent for detecting weak signals (-97 dBm in L Band, -90 dBm in C Band), critical for maintaining links in low-signal conditions.
5. Modulation Schemes:
   • Legacy Support: DSSS/CCK (used in older Wi-Fi/802.11b) for backward compatibility.
   • Modern Standards: OFDM/COFDM with up to 64-QAM for high-speed data (similar to LTE/Wi-Fi 802.11ac).
6. Layer 2 Ethernet Port: Acts as a wireless bridge, connecting wired networks (예를 들어, LANs) over a wireless link.
7. AES-256 Encryption: Ensures secure data transmission, aligning with military/enterprise-grade requirements.
8. Rugged Design:
   • 전원 입력 (12–26V DC): Compatible with vehicles (12V/24V systems) or industrial DC sources.
   • 작동 온도 (-40°C to +65°C): Survives extreme environments (arctic cold to desert heat).

---

일반적인 사용 사례

1. Military/Defense Tactical Networks:
   • Secure, mobile field communications for command centers, 드론, or vehicle-to-vehicle links.
   • Survivable in electronic warfare (dual-band redundancy mitigates jamming).
2. Public Safety & Emergency Response:
   • Rapid deployment for disaster recovery (예를 들어, connecting temporary command posts, hospitals).
   • Fire/police departments requiring reliable NLOS links in urban/rural areas.
3. 산업용 & Remote Site Connectivity:
   • Oil/gas pipelines, 채광, or wind farms needing backhaul for SCADA/IoT sensors.
   • Replaces fiber/cable in hard-to-reach locations.
4. Cellular Backhaul:
   • Cost-effective alternative to wired backhaul for 4G/5G small cells in rural areas.
5. 감시 & Border Security:
   • Transmitting HD video from remote cameras or UAVs (using high-bandwidth C Band).
6. Transportation & Maritime:
   • Ship-to-shore or train-to-base communications leveraging L Band’s NLOS capabilities.

---

Why This Device?

• Dual-Band Versatility: Switch between L Band (range/resilience) and C Band (속도) as needed.
• MIMO Performance: Doubles capacity/reliability for critical data (동영상, VoIP, 원격 측정).
• Ruggedness: Deployable in mobile/outdoor settings without climate-controlled enclosures.

This system is ideal for organizations needing안전한, high-speed wireless links in austere or dynamic environments where traditional infrastructure is impractical.