قم بتسجيل بث TS باستخدام USB ISDB-T TV Stick

1. ملخص

A USB ISDB-T TV tuner can receive digital TV signals through an antenna.
By using specific PC software, أنت تستطيع capture and record the raw TS (Transport Stream) from the broadcast.

Essentially:

TV Stick → Demodulation Software → Save as .TS file

2. What You Need

المعدات

  • أ USB ISDB-T TV stick (منها مثلا. RTL2832P RTL2832U, IT9135, AF9035, إلخ)
  • هوائي
  • Windows or Linux computer

البرمجيات

Different chips use different drivers and applications.
Below are common examples:

شرائحRecommended SoftwareTS Recording
RTL2832UDVBViewer, ProgDVB, SDRSharp + RTL2832U driver ✓
IT9135 / AF9035TotalMedia, BlazeDTV, DVB Dream ✓
لينكس (any DVB driver)w_scan + dvbv5-zap + dvbstream ✓ (CLI)

3. Installation Steps (مثال: شبابيك)

خطوة 1 – Install Driver

  1. Plug in your USB TV stick.
  2. If Windows does not install it automatically, use the vendor’s driver (Realtek, ITE, إلخ) أو Zadig tool.
  3. Once installed, check Device Manager — it should appear as something like: ISDB-T BDA Digital Tuner or RTL2832U DVB-T Dongle

خطوة 2 – Install Viewing Software

Let’s use DVBViewer as an example (you can also use ProgDVB or BlazeDTV):

  1. Install DVBViewer.
  2. Open Options → Hardware, and confirm your tuner is detected.
  3. Perform a channel scan (choose ISDB-T mode and your region/frequency band).
  4. Once channels are found, you can watch the broadcast.

خطوة 3 – Record the TS Stream

  1. Open the desired channel.
  2. Click سجل.
  3. The software will save the original Transport Stream (.ts) file to your recording folder.
  4. The file name usually includes the timestamp, على سبيل المثال: 2025-11-05_13-30-00_Channel1.ts

Tip: The .ts file contains all streams — video, صوتي, subtitles, and metadata.
You can view it with VLC or analyze it with TSReader.

4. Linux Command Line Example

If you are on Linux with DVB drivers installed:

# Scan channels
w_scan -ft -c JP > channels.conf

# Tune to a channel and record
dvbv5-zap -c channels.conf "NHK-G" -r &
dvbstream -o -ps 8192 > output.ts

This will create a raw output.ts file containing the broadcast stream.

5. Using the Recorded TS File

You can:

  • Analyze it with tools like TSReader Lite أو FFprobe
  • Play or transcode it using VLC أو FFmpeg
  • Extract specific programs مع: ffmpeg -i input.ts -map 0:p:101 -c copy output_video.ts

ملخص

خطوةAction
1Install the TV stick driver
2Launch DVBViewer / ProgDVB / TotalMedia
3Scan and open the desired channel
4Click “Record” to save the TS file
5Play or analyze with VLC / FFmpeg / TSReader

اطرح سؤالاً

← رجوع

شكرًا لردكم ✨