L C Band RF RF Ethernet Video Transcever

Chúng tôi yêu cầu bộ thu phát RF OEM với các tính năng này:

• Dải tần số: L Band and C Band (1200-1800 MHz and 4400-5000MHz)
• Băng thông RF: 2M/5M/10M/20M/40MHz
• Công suất đầu ra: 36-40 dBm (4W and 10W 2×2 Mimo)
• Độ nhạy của máy thu: L Band-97dBm Max, C band -90 dBm Max
• Modulation Support: OFDM: DSSS/CCK BPSK/QPSK, COFDM: BPSK/QPSK/16-QAM/64-QAM
• Layer 2 // ETH Port
• Mã hóa: AES256
• Đầu vào năng lượng: 12V-26V DC
• Nhiệt độ hoạt động: -40℃ ~ +65℃

Chúng tôi cũng thích FHSS. Are there any products with these specifications? Trong trường hợp đó, would you be able to provide the datasheet? Even if you don’t currently produce products with these features, let’s discuss the possibility of future development.

The device described by the specifications is acông suất cao, gồ ghề, dual-band wireless communication system designed forchắc chắn, tầm xa, high-throughput data transmission in challenging environments. Here’s a breakdown of its key features and typical applications:

Các tính năng chính & Analysis

1. Dải tần số:
   • L Band (1200–1800 MHz): Better penetration through obstacles, suitable for non-line-of-sight (NLOS) scenarios (VÍ DỤ., forests, urban areas).
   • C Band (4400–5000 MHz): Higher bandwidth for faster data rates but shorter range; ideal for line-of-sight (CÁC) links.
2. RF Bandwidth Flexibility (2–40 MHz): Balances data throughput and range. Wider bandwidths (VÍ DỤ., 40 MHz) enable high-speed applications, while narrower ones extend range or reduce interference.
3. High Output Power (4W–10W, 2×2 Mimo): Supports long-distance links (potentially tens of kilometers). MIMO improves spectral efficiency and reliability through spatial diversity.
4. Độ nhạy của máy thu: Excellent for detecting weak signals (-97 dBm in L Band, -90 dBm in C Band), critical for maintaining links in low-signal conditions.
5. Modulation Schemes:
   • Legacy Support: DSSS/CCK (used in older Wi-Fi/802.11b) for backward compatibility.
   • Modern Standards: OFDM/COFDM with up to 64-QAM for high-speed data (similar to LTE/Wi-Fi 802.11ac).
6. Layer 2 Ethernet Port: Acts as a wireless bridge, connecting wired networks (VÍ DỤ., LANs) over a wireless link.
7. AES-256 Encryption: Ensures secure data transmission, aligning with military/enterprise-grade requirements.
8. Rugged Design:
   • Đầu vào năng lượng (12–26V DC): Compatible with vehicles (12V/24V systems) or industrial DC sources.
   • Nhiệt độ hoạt động (-40°C to +65°C): Survives extreme environments (arctic cold to desert heat).

---

Trường hợp sử dụng điển hình

1. Military/Defense Tactical Networks:
   • Secure, mobile field communications for command centers, Máy bay không người lái, or vehicle-to-vehicle links.
   • Survivable in electronic warfare (dual-band redundancy mitigates jamming).
2. An toàn công cộng & Ứng phó khẩn cấp:
   • Rapid deployment for disaster recovery (VÍ DỤ., connecting temporary command posts, hospitals).
   • Fire/police departments requiring reliable NLOS links in urban/rural areas.
3. Công nghiệp & Remote Site Connectivity:
   • Oil/gas pipelines, Khai thác, or wind farms needing backhaul for SCADA/IoT sensors.
   • Replaces fiber/cable in hard-to-reach locations.
4. Cellular Backhaul:
   • Cost-effective alternative to wired backhaul for 4G/5G small cells in rural areas.
5. Giám sát & Border Security:
   • Transmitting HD video from remote cameras or UAVs (using high-bandwidth C Band).
6. Transportation & Maritime:
   • Ship-to-shore or train-to-base communications leveraging L Band’s NLOS capabilities.

---

Why This Device?

• Dual-Band Versatility: Switch between L Band (range/resilience) and C Band (tốc độ) as needed.
• MIMO Performance: Doubles capacity/reliability for critical data (video, VoIP, đo từ xa).
• Ruggedness: Deployable in mobile/outdoor settings without climate-controlled enclosures.

This system is ideal for organizations needingchắc chắn, high-speed wireless links in austere or dynamic environments where traditional infrastructure is impractical.