Can the Smart AI Tracking Flight Controller Module Work with Betaflight or iNav?
When drone enthusiasts first encounter the Smart AI Tracking Flight Control Module for FPV drones, one of the most common questions is whether this intelligent module can also work with popular flight systems such as Betaflight or iNav.
Let’s take a closer look at how the module operates and what flight control environments it supports.
PX4-Based Intelligent Flight Control
The Smart AI Tracking Flight Control Module is a two-in-one system that combines AI visual tracking and a PX4-based flight controller in one lightweight board. It’s designed for autonomous tracking, target recognition, and real-time object locking for FPV drones, UAVs, and inspection platforms.
Since it’s built on the PX4 firmware, all system configuration, calibration, and flight mode setup are handled through QGroundControl (QGC) — the official ground control software for PX4 systems.
QGroundControl (QGC) Compatibility
To unlock the full potential of this AI tracking system, users must connect the module to QGroundControl.
Through QGC, you can:
- Calibrate sensors and flight orientation
- Configure flight modes, arming switches, and emergency kill switches
- Assign AI lock channels for target tracking
- Update firmware via USB
The module also communicates using MAVLink, which QGC fully supports, ensuring stable telemetry and parameter management.
Why It Doesn’t Work with Betaflight or iNav
Although Betaflight and iNav are popular open-source flight controller firmware platforms, they are not compatible with this AI module. Here’s why:
- Both Betaflight and iNav use their own configuration tools and do not support PX4 architecture.
- They cannot communicate through MAVLink, the protocol required for QGC and the AI tracking functions.
- The Smart AI Tracking module replaces the entire flight controller — it is not an add-on board for existing systems.
Therefore, users cannot configure or operate this module through Betaflight Configurator or iNav Configurator.
Summary
| Feature | Supported |
|---|---|
| PX4 Firmware | ✅ Yes |
| QGroundControl (QGC) | ✅ Fully Supported |
| Betaflight | ❌ Not Supported |
| iNav | ❌ Not Supported |
| MAVLink Telemetry | ✅ Yes |
Final Thoughts
The Smart AI Tracking Flight Control Module is designed specifically for PX4-based drone systems and works seamlessly with QGroundControl. It cannot be used with Betaflight or iNav, as those platforms use different architectures and lack support for the AI tracking and PX4 flight control functions.
For drone builders and integrators who want AI-powered target tracking, autonomous flight, and real-time visual control, pairing this module with QGroundControl ensures the best performance and stability.
Ask A Question
Thank you for your response. ✨