360 Չորս խցիկի մուտք մեկ տեսանյութի արտադրանք 4 դեպի 1 Խելացի համայնապատկեր

360 տեսախցիկի փոխարկիչ

360 degree four camera input one video output 4 դեպի 1 Խելացի համայնապատկեր

 

Նկարագրություն

360 տեսախցիկի փոխարկիչ, 4 դեպի 1 Խելացի 360 Panoramic Switcher is supposed to add more video inputs for cameras when it’s connected with video interface for different car models. It’s a sort of DIY solution for customers with easy installation. The switcher can work with a video interface, aftermarket car DVD, or monitor.

Հստակեցում

1. Four video inputs: Left view, Right view, Front view, and Reverse view. There is a +12V power supply for each video input.
2. Four video outputs share with one video channel with the same power trigger line.
3. When each camera gets a power supply from the corresponding car lamp, the display could show the correct video channel by turning on the left and right indicator or back up. When you turn “Ռ” to other gear, the display will show the front view for 7 վայրկյան (it’s optional). հետո 7 վայրկյան, it gets back video output closed state.
4. Cable color refers to +12V power (Red cable), GND – (Black cable), Left indicator (Blue cable), Right indicator (Green cable), and Back-up lamp (White cable)
5. The product itself has designed the product power and the camera supply protection circuit carries on the protection to the camera and the vehicle circuit.
6. It adopts a wireless remote control.
7. Wide voltage VCC 8-16V; If it’s applied in the truck, you should use a 24V to 12V transformer.

Փաթեթ

Standard contents: 4 դեպի 1 խելացի 360 Panoramic Switcher, Հեռակառավարման վահանակ, manual book.

Տեղադրում

1. Blue trigger line to connect with backup lamp power
2. White trigger line to connect with left indicator power
3. Green trigger line to connect with right indicator power
4. Red and the black line is + 12V power input
5. Հեռակառավարման վահանակ:
   M button — Switch the module and Exit from the camera output
   B button — Reverse camera
   R button — Right camera
   L button — Left camera
   F button — Front camera

(The display view could be switched by both the power trigger line and remote control. If you think the power trigger connection is complex, you can use the remote control. Only in that case when exiting from back-up to front view 7s, it only supports the back-up trigger. It mainly reduces error operations.)

Product Features Overview

Our product allows for the simultaneous connection of four cameras positioned around the vehicle: one in front, one in the rear, and one on each side (left and right). Լրացուցիչ, it includes three trigger lines for enhanced functionality.

Camera Functionality

Forward Motion: When the vehicle is moving forward, the display primarily shows the video feed from the front camera.
Reversing: Upon engaging reverse gear, the trigger line linked to the reverse light activates, automatically switching the display to show the rearview camera.

Turning Signals:

The left camera’s trigger line is connected to the left turn signal. When activated, it switches the display to show the left-side camera view.
Similarly, the right camera’s trigger line connects to the right turn signal, allowing for a seamless switch to the right-side camera when needed.

Switching Mechanism

As a sophisticated switcher for onboard cameras, our system intelligently rotates through the camera feeds based on the vehicle’s driving signals. Please note that only one camera feed can be displayed simultaneously, ensuring clarity and focus on the relevant surroundings.

Video Shows function

Պատկերասրահ

ՀՏՀ

Հ: Can the video of four cameras be displayed on the same monitor?

Ա: Our product supports connecting four cameras at the same time, in front of the car, behind the car, on the left side of the vehicle, and on the right side of the car, and there are three trigger lines.
When the car is moving forward, the display normally displays the video in front of the car. When the car starts to reverse, the trigger line connected to the reverse light works, and the display switches to the rearview camera.
In the same way, the trigger line of the left camera is connected to the left turn signal, and the trigger line of the right camera is connected to the right turn signal.
As a switcher for on-board cameras, the current camera screen can be switched in turn according to the car’s driving lights, and the screen of four cameras cannot be displayed at the same time.