Акылдуу AI көз каранды сандаган контроллер модулун көзөмөлдөөчү модулу?
When drone enthusiasts first encounter the Smart AI Tracking Flight Control Module for FPV drones, one of the most common questions is whether this intelligent module can also work with popular flight systems such as Бетаф же Инов.
Let’s take a closer look at how the module operates and what flight control environments it supports.
PX4-Based Intelligent Flight Control
The Smart AI Tracking Flight Control Module is a two-in-one system that combines AI visual tracking жана a PX4-based flight controller in one lightweight board. It’s designed for autonomous tracking, target recognition, and real-time object locking for FPV drones, Uavs, and inspection platforms.
Since it’s built on the PX4 firmware, all system configuration, calibration, and flight mode setup are handled through Qgegoncontrol (QGC) — the official ground control software for PX4 systems.
Qgegoncontrol (QGC) Шайкештик
To unlock the full potential of this AI tracking system, users must connect the module to Qgegoncontrol.
Through QGC, you can:
- Calibrate sensors and flight orientation
- Configure flight modes, arming switches, and emergency kill switches
- Assign AI lock channels for target tracking
- Update firmware via USB
The module also communicates using MAVLink, which QGC fully supports, ensuring stable telemetry and parameter management.
Why It Doesn’t Work with Betaflight or iNav
Although Betaflight and iNav are popular open-source flight controller firmware platforms, they are not compatible with this AI module. Here’s why:
- Both Betaflight and iNav use their own configuration tools and do not support PX4 architecture.
- They cannot communicate through MAVLink, the protocol required for QGC and the AI tracking functions.
- The Smart AI Tracking module replaces the entire flight controller — it is not an add-on board for existing systems.
Ошондуктан, users cannot configure or operate this module through Betaflight Configurator же iNav Configurator.
Кыскача
| Өзгөчөлүгү | Supported |
|---|---|
| PX4 Firmware | ✅ Yes |
| Qgegoncontrol (QGC) | ✅ Fully Supported |
| Бетаф | ❌ Not Supported |
| Инов | ❌ Not Supported |
| MAVLink Telemetry | ✅ Yes |
Акыркы ойлор
The Smart AI Tracking Flight Control Module is designed specifically for PX4-based drone systems and works seamlessly with Qgegoncontrol. It cannot be used with Бетаф же Инов, as those platforms use different architectures and lack support for the AI tracking and PX4 flight control functions.
For drone builders and integrators who want AI-powered target tracking, autonomous flight, жана real-time visual control, pairing this module with Qgegoncontrol ensures the best performance and stability.
Суроо берүү
Сиздин билдирүү жөнөтүлдү