Inquiry about the communication link for aerial vehicle and ground station

I am reaching out to inquire about Product Vcan1933, which I understand is designed for establishing communication links between aerial vehicles and ground stations. Swoiście, I require this product for the following scenarios:
Scenario 1: Point to Point Mode
Zamiar: Establishing an 8 MHz bandwidth Video communication link between an aerial vehicle and a ground station.
Distance: 200 km (direct link).
Request: Please provide the Bill of Materials (BOM) and pricing for both sample purchases and bulk orders.
Scenario 2: Przekaźnik / Repeater Mode
Zamiar: Extending the communication range to 400 km by adding an aerial relay.
Request: Kindly share the BOM and pricing (for samples and bulk orders) for this extended setup.
Could you also clarify the following:
Lead time for sample and bulk orders.
Available support (technical documentation, integration guidance, itp.).
Any recommended accessories or complementary products.
Dodatkowo, do you have any alternative products or solutions that may perform better than Vcan1933 for these scenarios? I would appreciate any recommendations you might have.
I appreciate your prompt attention to this request. Please let me know if you need further details from my side.
What is the communication link for aerial vehicle and ground station?
Communication links between aerial vehicles (such as UAVs, drony, and aircraft) and ground stations are essential for control, data transfer, and navigation. These links can be categorized as follows:
1. Command and Control (C2) Link
- Used for sending commands from the ground station to the aerial vehicle.
- Ensures the aircraft follows predefined flight paths or responds to real-time commands.
- Operates typically on radio frequencies (RF), such as VHF, UKF, or dedicated aviation bands.
2. Telemetry Link
- Transmits flight data (wysokość, prędkość, stan baterii, sensor readings) from the aerial vehicle to the ground.
- Helps operators monitor and adjust mission parameters.
- Usually operates on the same RF bands as C2 links.
3. Payload Data Link
- Transfers mission-critical data like video, images, i dane czujnika.
- Used in ISR (Intelligence, Nadzór, and Reconnaissance) aplikacje.
- Can use high-bandwidth communication such as:
- Wi-Fi (2.4 GHz, 5 GHz)
- Satellite Links (Ka-band, Ku-band)
- 4G/5G networks (for urban drones)
4. Navigation and GPS Link
- Receives positioning signals from GNSS (GPS, GLONASS, Galileo, BeiDou) satellites.
- Used for precise positioning, nawigacja, and geofencing.
5. Beyond Visual Line of Sight (BVLOS) Link
- Required for long-range drone operations beyond direct radio range.
- Uses satellite communication (SatCom) or cellular networks for extended coverage.
- Low-latency data relays are essential to prevent communication lag.
6. Satellite Communication (SatCom) Link
- Used for high-altitude UAVs, military aircraft, and long-endurance operations.
- Provides global coverage using geostationary or low-earth orbit satellites.
- Operates on Pasmo L, C-band, Ku-band, or Ka-band frequencies.
7. ADS-B (Automatic Dependent Surveillance–Broadcast)
- Used in manned and unmanned aviation to share location and flight status.
- Transmits data to air traffic control and nearby aircraft for collision avoidance.
- Operates on 978 MHz (UAT) I 1090 MHz (ES) frequencies.
Communication Technologies Used
- RF (Radio Frequency) Communication – Standard for short- and medium-range UAVs.
- LoRa (Long Range) – Low-power, long-distance communication.
- Mesh Networks – Allows drones to communicate with each other and extend range.
- Cellular (4G/5G) – Enables BVLOS operations in areas with network coverage.
- Laser/Optical Communication – High-speed data transmission for secure links.
The choice of communication link depends on the mission requirements, zakres, data bandwidth, and regulatory constraints. Let me know if you need details on a specific type!
Czy oferujecie jakieś produkty o zasięgu wideo 200 km, które kosztują mniej niż $3000?
Obecnie nie mamy łącza danych wideo UAV, które kosztuje 3000 USD za obsługę 200 km. Jeżeli jest to komplet osprzętu na 200km, wymagane są dwa transceivery, one for transmitting and one for receiving. Jeśli chodzi o obecną sytuację, budżet 3,000 juan jest wciąż trochę mały, i można kupić tylko jedno urządzenie.

Zadaj pytanie
Twoja wiadomość została wysłana