Integrated Adaptive Frequency-Hopping Wireless Communication System for Drone Swarms

Visão geral

This system is designed to enable reliable, simultaneous transmission of high-definition video and telemetry data from multiple UAVs to ground control stations. It is optimized for FPV drone platforms (including Betaflight and Kakute flight controllers) and supports long-range, low-latency communication in complex electromagnetic environments.

---

Principais recursos

• Multi-Node Support: Operates with up to 15 airborne units (air nodes) simultaneously.
• High-Quality Video Transmission: Apoia 1080P @ 60 fps digital video streaming via Ethernet.
• Integração de telemetria: Compatível com:
  • Sbus (100000 baud, inverted)
  • UART TTL (460800 baud)
• Baixa latência: End-to-end delay < 0.2 segundos.
• Longo alcance: Reliable transmission up to 15 km.
• Adaptive Frequency Hopping: Intelligent pseudo-random hopping based on real-time RF environment analysis.
• Digital Modulation: Ensures robust and efficient spectrum usage.

---

System Architecture

• Topologia: Star network configuration
• Components:
  • 15 Air Units (UAV-mounted)
  • 1 or multiple Ground Control Stations
• Frequency Management: Operates across multiple non-overlapping bands to minimize interference.

---

Bandas de frequência

Supported operational bands include:

• 900–1100 MHz (opcional: 800–1100 MHz, 950–1200 MHz)
• 1200–1400 MHz (opcional: 1300–1500 MHz)
• 2400–2600 MHz (opcional: 2100–2200 MHz)
• 3300–3500 MHz (opcional: 2900–3900 MHz)
• 5800–6000 MHz
• 6000–7000 MHz

---

Desempenho & Confiabilidade

• Stable operation in urban environments e moderate RF interference (SNR ≤ 0).
• Maintains synchronization during frequency hopping.
• Continuous multi-channel data reception without interruption.

---

Power Specifications

Unidade Aérea

• Fonte de energia: DC 12–24 V
• Consumo de energia: ≤ 25 W
• Potência de saída de RF: ≥ 1 W (30 dBm)

Ground Station

• Fonte de energia: DC 12–24 V
• Consumo de energia: ≤ 150 W
• Potência de saída de RF: ≥ 20 W (43 dBm)

---

Especificações Físicas

Unidade Aérea

• Peso: ≤ 75 g
• Dimensões: ≤ 50 × 50 × 20 milímetros

Ground Station

• Peso: ≤ 2 kg
• Dimensões: ≤ 240 × 240 × 75 milímetros

---

Environmental Conditions

• Faixa de temperatura operacional: -30° C a +50 ° C.

---

Interfaces

Unidade Aérea

• Entrada de vídeo: 100M Ethernet (SH1.0 4-pin)
• Telemetria:
  • Sbus
  • UART TTL

Ground Station

• Output to Operator: Ethernet (digital preferred)

---

Adaptive Frequency-Hopping Technology

• Real-time spectrum sensing and channel occupancy analysis
• Dynamic pseudo-random hopping sequence generation
• Continuous synchronization between air and ground units
• Maintains stable video and telemetry transmission under interference

---

Compliance & Testing

The system is validated through the following tests:

1. Simultaneous Operation Test:
   All 15 air units transmit video and telemetry continuously for 10 minutos.
2. Latency Test:
   Verified under 15 km range and >10 MHz bandwidth.
3. Compatibility Test:
   Works with SBUS, CRSF, and ELRS protocols.
4. Frequency Compliance:
   Operates strictly within designated frequency bands.
5. Tamanho & Weight Verification:
   Meets all physical constraints.
6. Temperature Test:
   Fully functional across specified temperature range.
7. Power Consumption Test:
   Within defined limits for both air and ground units.
8. Interference & Hopping Test:
   Demonstrates stable communication under broadband interference using adaptive frequency hopping.

---

Formulários

• Drone swarm operations
• Long-range FPV missions
• Surveillance and reconnaissance
• Industrial inspection
• Emergency response and search & resgatar

---

Conclusão

This system delivers a powerful combination of high-performance video transmission, robust telemetry integration, e advanced adaptive frequency-hopping technology, making it an ideal solution for demanding multi-UAV operations in challenging environments.